点击图片查看原图
“全自动单头剥皮打端机”参数说明
| 品牌： | 永信 | 自动化程度： | 全自动 |
| 压着力： | 2（T）及以下 | 速度： | 2000~20300pcs/h |
| 950W*750L*1550H： | 约155kg | 产量： | 50 |
“全自动单头剥皮打端机”详细介绍
1.采用电脑触控方式调整剥皮长度，端子压着位置，以及深度调整，快速变更设定且操作简易。
2.设计有检测装置，异常时能自动停机，并将检测出状况显示于控制面板，方便快速排除状况以减少停机时间。
3.端子压着位置采用面板控制调整端子压着位置。
1.Applying the touch screen monitor and the wire strip length can be adjusted on the main control panel,it is quick to change the setting and easy to operate .
2.Automatically shutting down the machine during exceptional condition and displaying the inspected condition on the monitor for conveniently ,rapidly eliminating the conditions and reducing shutting down time.
3.The crimping seat can be adjusted on the touch screen.
2.设计有检测装置，异常时能自动停机，并将检测出状况显示于控制面板，方便快速排除状况以减少停机时间。
3.端子压着位置采用面板控制调整端子压着位置。
1.Applying the touch screen monitor and the wire strip length can be adjusted on the main control panel,it is quick to change the setting and easy to operate .
2.Automatically shutting down the machine during exceptional condition and displaying the inspected condition on the monitor for conveniently ,rapidly eliminating the conditions and reducing shutting down time.
3.The crimping seat can be adjusted on the touch screen.
“全自动单头剥皮打端机”其他说明
| 型号 | YX-D25+T |
| 电压 | AC220V/50HZ |
| 功能 | 电线切断，电线剥皮扭线，单头端子压着 |
| 产量 | 4500-4800条/小时（长度300mm以内） |
| 可加工电线规格 | AWG#28-AWG#18 |
| 裁线长度 | 25mm-9999mm |
| 裁线误差 | ≤（0.1mm+cutting length*0.002) |
| 剥皮长度 | 0-12mm |
| 压着能力 | 2.0tons (1.5tons,2.5tons,3tons可选） |
| 气压 | 4-6kg/c㎡ |
| 检测装置 | 端子有无，端子过载，气压低下，电线有无，电线打结 |
| 包装尺寸 | 950W*750L*1550H(mm) |
| 毛重 | 约245kg |