点击图片查看原图
通过认证 
“麦肯MDT2051 DIP18 集成电路单片机 原装正品芯片”参数说明
| 是否有现货： | 否 | 封装： | DIP |
| 功能结构： | 数/模混合集成电路 | 制作工艺： | 半导体集成电路 |
| 导电类型： | 双极型 | 外形： | 双列直插型 |
| 集成度高低： | 为小规模集成电路 | 应用领域： | 标准通用 |
| 型号： | MDT2051 | 规格： | DIP18 |
| 产量： | 5000000 |
“麦肯MDT2051 DIP18 集成电路单片机 原装正品芯片”详细介绍
概要
This EPROM-Based 8-bit micro-controller uses a fully static CMOS technology process to achieve higher speed and smaller size with the low power consump-tion and high noise immunity. On chip memory incl-udes 1K words of ROM, and 68 bytes of static RAM.
特点
The followings are some of the features on the hardware and software :
◆Fully CMOS static design;
◆8-bit data bus;
◆On chip EPROM size : 1K words;
◆Internal RAM size : 84 bytes(68general purpose registers, 16 special registers);
◆37 single word instructions;
◆14-bit instructions;
◆8-level stacks;
◆Operating voltage : 2.5V ~ 5.5 V(PRD disable); 4.5V ~ 5.5 V(PRD Enable);
◆Operating frequency : DC ~ 20 MHz;
◆The most fast execution time is 200 ns under 20 MHz in all single cycle instructions except the branch instruction
◆Addressing modes include direct, indirect and relative addressing modes
◆Power-on Reset
◆Power edge-detector Reset
◆Power range-detector Reset
◆Sleep Mode for power saving
◆Four interrupt sources:
--External INT pin
This EPROM-Based 8-bit micro-controller uses a fully static CMOS technology process to achieve higher speed and smaller size with the low power consump-tion and high noise immunity. On chip memory incl-udes 1K words of ROM, and 68 bytes of static RAM.
特点
The followings are some of the features on the hardware and software :
◆Fully CMOS static design;
◆8-bit data bus;
◆On chip EPROM size : 1K words;
◆Internal RAM size : 84 bytes(68general purpose registers, 16 special registers);
◆37 single word instructions;
◆14-bit instructions;
◆8-level stacks;
◆Operating voltage : 2.5V ~ 5.5 V(PRD disable); 4.5V ~ 5.5 V(PRD Enable);
◆Operating frequency : DC ~ 20 MHz;
◆The most fast execution time is 200 ns under 20 MHz in all single cycle instructions except the branch instruction
◆Addressing modes include direct, indirect and relative addressing modes
◆Power-on Reset
◆Power edge-detector Reset
◆Power range-detector Reset
◆Sleep Mode for power saving
◆Four interrupt sources:
--External INT pin
